Do you place extremely high requirements on accurate results for analytical weighing? Obtain the highest quality of results in your analytical weight measurements with perfectly readability up to 0.001 mg | 1 μg. Featuring a maximum capacity between 1.1 g and 110 g, Sartorius micro lab balances determine the exact weight of the smallest quantities – and deliver an unsurpassed performance.
Explore micro laboratory balances
Sartorius micro lab balance really shines with its unique titanium weighing pan supplied as standard equipment. Non-magnetic and absolutely inert in contact with aggressive substances, the titanium components of Sartorius micro balance ensure 100% protected weighing. Also, all micro lab balances are equipped with a manual draft shield, automatic draft shield, or touchless draft shield, included learning function and illumination, or with a stainless steel draft shield for filter weighing applications. Micro lab balances are featured by a unique temperature management system to ensure stable climate conditions within the weighing chamber.
FAQ
Calibration: Determining the correlation between the displayed value and the true weight of the sample on the balance. Calibration does not imply changes inside the weighing instrument.
Adjustment: Setting up the weighing instrument to eliminate differences between the reading and the actual mass value on the weighing instrument.
Each balance must be leveled to ensure accurate weighing results.
Ideally, balances have an automatic, motorized, one-touch leveling function. Other balances come with built-in real-time leveling support and interactive user instructions for proper leveling.
In either case, an internal electronic level sensor continuously monitors proper leveling and will display warning messages when the balance is not level.
Balances without the above features must be manually leveled using readily available leveling feet.
Please note: Each time the balance is leveled, it must also be adjusted. In addition, the balance needs to be re-leveled and adjusted every time the installation location is changed.
Most balances today come equipped with this type of fully automatic calibration and adjustment function, activated at specific or at user-defined intervals. In addition, when a defined temperature difference is exceeded, the calibration/adjustment procedure is triggered automatically. This makes it possible to ensure the accuracy of the balance without operator intervention.
Most balances come with a "PC-direct" feature, so just connect the balance to your computer using the included data cable. It is not necessary to install any special software on the computer.
